Product Overview of stainless steel solenoid valves

All valve cores of stainless steel solenoid valves are stainless steel pistons. The piston ring will not be jammed by impurities in the fluid, featuring high dynamic sealing performance and an extra-long service life. There is no direct friction between the piston and the metal valve cavity, allowing unrestricted valve body installation. Equipped with a special energy-saving coil, it is resistant to burnout. Even after long-term inactivity, the stainless steel solenoid valve remains sensitive when restarted. The minimum starting pressure is 0.3MPa.

Product Features of stainless steel solenoid valves

All valve cores are stainless steel piston-type, with piston rings made of special temperature-resistant and wear-resistant materials.

No direct friction between the piston and the metal valve cavity, enabling unrestricted installation direction of the valve body.

Equipped with a special coil and an integrated heat dissipation structure, ensuring resistance to burnout.

Remains sensitive when restarted after long-term inactivity.

Minimum starting pressure: 0.3MPa.

Working Principle of stainless steel solenoid valves

Normally Closed (NC):

When the coil is energized, the pilot valve core is attracted, the pilot hole opens, and the upper chamber of the valve releases pressure. The piston is pushed by the medium pressure in the lower chamber, opening the solenoid valve. When the coil is de-energized, the pilot valve core resets via the spring, the pilot hole closes, and the upper chamber of the valve is pressurized through the piston orifice. With the thrust of the return spring, the valve closes.

Normally Open (NO):

When the coil is energized, the pilot hole closes, the upper chamber of the valve is pressurized through the piston orifice, and with the thrust of the return spring, the solenoid valve closes. When the coil is de-energized, the pilot valve core resets via the spring, the pilot hole opens, the upper chamber of the valve releases pressure, and the piston is pushed by the medium pressure in the lower chamber, opening the solenoid valve.

Technical Parameters of stainless steel solenoid valves

Nominal Diameter: DN15～DN300 (G1/8"～12")

Operation Mode: Pilot type, direct-acting type, explosion-proof type

Operating Environment Temperature: -30—+80℃; -50—+100℃

Coil Operating Temperature: <+50℃, <+85℃

Control Mode: Normally Open (NO), Normally Closed (NC)

International Standard Voltage: AC (380, 220, 110, 24) V; DC (220, 110, 24, 12) V

Circulating Fluid Medium: Water, steam, oil, and other high-temperature fluids

Circulating Fluid Temperature: <+120℃, <+200℃, <+350℃, <+450℃, <+550℃, <+800℃

Circulating Fluid Pressure: 64—4000bar

Valve Body Material: Stainless steel (304, 316, 316L, etc.)

Connection Method: Threaded (internal thread, external thread), flanged, welded, clamped